polishing jumbo roll

abrasive/abrasive paper/flap disc good effct polishing.grind wgeek canapplied for grit line finisheson brass plates cind satin

can be applied for grit line finisheson brass plates cind satin finishes on soft metals.density or hardness,adjust by changing the pcs of pads in each Flap wheel,and can also increase the hardness by chemical treatment.

non-woven abrasive brush roll/buff/grinding wheel/abrasive/abrasive paper/flap disc/polishing pad/cutting wheel

NON - WOVEN ABRASIVE HAND PAD
DISCS SIZE	4"12"	HAND PADS SIZE	5"X8"
			6"X9"
GRAND	60#2000#	GRAND	60#2000#
DENSITY	1P	DENSITY	1P
PURPOSE	DISCS CAN CLEAN SURFACES,REMOVE PAINT,RUST AND CORROSION OF CONDITION ABRASIVE GRIND LINES.SUIT FOR:PHOTO FRAME,WATCH,STRAP
CONCOLUTE WHEEL
SIZE			4"6"
GRAND			60#2000#
PIECES			40220
PURPOSE	THEY CAN BE APPLIED FOR GRIT LINE FINISHESON BRASS PLATES CIND SATIN FINISHES ON SOFT NETALS.
NON_WOVEN ABRASIVE WHEELS
SIZE			6"16"
GRAND			60#1600#
DENSITY			3P16P
ULTRA WHEELS
SIZE			4"
GRAND			180#400#
DENSITY			7P9P
NYLON ABRASIVE BRUSH
GRAND			60#2000#
OUTER DIAMETER			4"16"
LENGTH			10"64"
DENSITY			4p18P
PURPOSE	IT HAS HIGH WEAR-RESISTING,HIGH LEVEL-UP,HIGH ACID-RESISTANT,AND RESISTANCE OF WATER AND LIL.SPECIALLY SUITABLE FOR STAINLESS STEEL PLATE AND CLEAN PRINTING INK,EPOXY RESIN AND OXIDE FILM.
NON-WOVEN ABRASIVE BRUSH
GRAND			60#2000#
OUTER DIAMETER			4"16"
LENGTH			10"64"
HARDNESS			SOFT/HARD/ESPECIALLY HARD
PURPOSE	MADE OF JAPANESE DOUBLE STAR ABRASIVE MATERIALS IS CONSUM MATELY MANUFACTURED.
	1.IT IS SUITABLE FOR STAINLESS STEEL PLATE.
	2.IT IS SUITABLE FOR DENSITY WOODEN PLATE.
	3.IT IS SUITABLE FOR THIN BOARD AND MULTILAYERED PRINTED CIRCUIT.
BIAS CLOTH BUFF & CENTE PLATE
PURPOSE	FOR IRREGULAR METAL WARE,DIECASTING,PLASTIC,LACQUER,WOOD.USED EXTENSIVELY IN MANUAL,SEMI_AUTOMATIC AND AUTOMATIC MACHINES.FOR FINE AND NON_STREAK POLISHING,GOOD RETENTION OF POLISHING COMPOUNDS FOR COTTON CLOTH,SELF_COOLING IN OPERATION.
				NON_WOVEN VENTILATED WHEEL
				AVAILABLE IN THE WIDE RANGE OF NON_WOVEN NYLON FIBRE FABRICS,IN ALUMINIUM OXIDE OR SILICONE CARBIDE,AND IN VARIOUS GRAINS AND DIMENSIONS.THEY CAN BE USED ON MANUAL SUITABLE TO BE ASSEMBLED IN ORDER TO MAKE A LONG ROLLER TO BE USED ON BENCH_MOUNTED OR PILLAR MACHINES.THET ARE USED FOR SATIN FINISHING OF METAL SURFACES WHERE THERE ARE SPACE PROBLEMS.THANKS TO THEIR VENTILATED CONSTRUCTION,THE VENTILATED AND RADIAL WHEELS ALLOW A MORE UNIFORM AND HOMOGENEOUS FINISHING

polishing jumbo roll